Signal-to-Noise Ratio: 70 dB (line input)įrequency Response: 95 Hz to 17.6 kHz, -3 dB re 1 kHz (line inputs)ġ25 Hz to 17.0 KHz, -3 dB re 1 kHz (microphone input) Indicators On/Off: Momentary contact switch turns on/off indicator lightsįrequency Selection: Press and hold momentary contact switch to change carrier frequency group. Lights up and stay on steady with minimum audio level. BĪudio Inputs / Controls: Line inputs: Phoenix style connector jack for Ch A and Ch B accept line level, balanced or unbalanced audioĪudio indicators: One yellow LED per channel. Microphone channel switch: Selects microphone input to Ch. Microphone gain adjust: Rotary 10 dB range Microphone input: 3.5 mm, stereo jack with signal and bias connected to tip, electret microphone compatible (6 VDC bias supply with 2.7 k ohm series resistor) m) in single-channel mode with the RX22-4 receiver ![]() Modulation: FM Wideband, ±50 kHz deviation max, 50 μS pre-emphasisīaseband Frequencies: 2.3, 2.8, 3.3, 3.8 MHzĬhannels: Indicators: Yellow LEDs indicate whether 2.3/2.8 MHz or 3.3./3.8 MHz baseband frequencies are selectedĬoverage Area: Up to 18,000 sq. ![]() Sleep/Power Save Mode: Shuts off carrier when no audio is present for 12 minutes Power Supply: TFP 057 (or TFP 061 with certain systems) Desktop style international certified power supply with IEC line cord, 100-240 VAC input, 50-60 Hz, 18 W 48 VDC outputĭC Power Input: 2.1 mm ID barrel connector, 48 VDC, 0.2A, center positive
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |